Assembly Instructions
Assembly Instructions
Stage 1 –
Fitting the Lamp
D
A
E
fig. 1
fig. 3
1. Screw the Lamp A into the Tube
D . Ensure all the wires fit to the
tube and they are not trapped.
See fig. 1.
3. Screw the unit onto the Base E .
See fig. 2.
E
fig. 2
D
D
Stage 2 –
Fitting the Base
1. Open the Terminal Block at the
Base E . Connect the wires of the
Lamp to the Terminal Block.
See fig. 3.
MAINS
BROWN or RED
BLUE or BLACK
GREEN / YELLOW
LIVE
NEUTRAL
LIGHT
EARTH
2. Assemble the other Tube D by
screwing into place.
See fig. 2.
NOTE: Take care when assembling
and screwing into place, taking
care not to damage the wires
and light fitting.
2. Use Terminal Block to connect
the mains supply, ensure all the
wires are firmly fixed in place.
See fig. 4 .
NOTE: Ensure electricity is
switched off at the mains before
installing or maintaining any
light fixture.
NOTE: Ensure electricity is
switched off at the mains before
installing or maintaining any
light fixture.
fig. 4
