w w w . a r g o n a u d i o . c o m
20
R a d i o 3 i
6.3 Now playing information
While a track is playing, the screen shows its trackname (UPnP).
There is also a progress bar with figures for elapsed and total track
time. At the bottom of the screen, an icon indicates
UPnP
.
To view further information, press Info .
Each time you press Info , another set of information is displayed,
cycling through the following:
•
Artist, album, codec/sampling rate, playback buffer
7. DAB radio mode
DAB radio mode receives DAB/DAB+ digital radio and displays
information about the station, stream and track playing.
To enter DAB mode, either press Mode until the display shows:
DAB Radio
or select; Menu >
Main menu > DAB
.
7.1 Scanning for stations
The first time you select DAB radio mode, or if the station list is
empty, Radio3i automatically performs a full scan to see what
stations are available. You may also need to start a scan manually
to update the list of stations for one of the following reasons:
•
Available stations change from time to time.
•
If reception was not good for the original scan
(for example the antenna was not up), this may result in
an empty or incomplete list of available stations.
•
If you have poor reception of some stations (burbling),
you may wish to list only stations with good signal strength.
To start a scan manually, select Menu >
Scan
.
Once the scan is complete, the radio shows a list of available stations.
To remove stations that are listed but unavailable, select Menu >
Prune invalid
.
7.2 Selecting stations
To listen to or change a station, turn the Select control to view a list of stations and press to select. Once
selected, the station plays and the screen shows information about the station, track or show as broadcast.
Presets
To store a DAB preset, press and hold Preset until the display shows the
Save preset
screen. Select one
of the 10 presets (on the remote) to save the currently playing station.
To select a preset, press Preset briefly, then select one of the listed preset stations. When a preset
station is playing, it shows P
n
(P1, P2 etc) in the bottom right of the screen.
7.3 Now playing information
While the stream is playing, the screen shows its name and DLS (
Dynamic Label Segment
) information
broadcast by the station giving real-time information such as programme name, track title and contact
details. Stereo broadcasts are indicated with an icon at the top of the screen. To view further information,
press Info .
Each time you press Info , another set of information is displayed, cycling through DLS text, programme
type, ensemble name/frequency, signal strength/error rate, bit rate/codec/channels and today’s date.
