Boot Block Fails to Load DOS
After RPLBIND1 and RPLBIND2 are executed, the boot block prints the
following message:
Non-system disk or disk error Replace and press any key when
ready
The message is printed when the boot block fails to load DOS from the
server. Check that the DOS system files are copied correctly to:
\\%systemroot%\rpl\rplfiles\binfiles\dosxxx.
Make sure the attributes HIDDEN and SYSTEM are removed from the files,
IO.SYS and MSDOS.SYS. If you are using IBM PC-DOS, rename
IBMBIO.COM and IBMDOS.COM to IO.SYS and MSDOS.SYS.
87
