NITROGEN PRO 230A: 9. Seatpost Installation
32
1. Place the seat post collar inside the
frame.
2. Insert the seatpost (3) on which
some carbon fiber assembly gel has
been applied.
3. Position the seatpost to the desired
height.
4. Apply a drop of blue Threadlocker
(n. 242) on the bolt’s thread
5. Tighten the set screw at max. 5.5Nm
while leaving a space between the two
parts allowing them to slide.
GREASE
GREASE
THREADLOCKER
BLUE (n. 242)
LOCTITE
GREASE
CARBON FIBER
ASSEMBLY
COMPOSITE
5.5 Nm
1Nm
11
RUNNING CHANGE
11
12
