Note: To make the brake cable housing go inside the handlebar more easily, use a brake cable as
a guide and insert it head first (from the middle of the handlebar towards the brake lever) using
one of the two side holes. Follow the curves of the handlebar. Once the cable is out, slide the cable
housing along.
IMPORTANT : You must cut the metal ferrule located at the end of the rear brake EZ-Bend cable housing
prior to install it correctly on the rear brake barrel adjuster.
16
E-118 NEXT 216A: 5. Cable housing installation (continued)
A
B
C
1 . 5Nm
EZ-Bend
Mechanical drive-train configuration
Electronic drive-train configuration
EZ-Bend
