5.1 Install the rear derailleur cable
housing starting at the drive side’s
drop-out.
5.2 Install the front derailleur cable
housing starting under the bottom
bracket shell.
5.3 Install the front brake cable housing
starting at the center of the handlebar.
Make sure that the cable housing
does not go through the compression
column, but through the space in front
of the compression column (see image
A, page 16).
5.4 Install the rear brake cable housing
starting under the bottom bracket shell.
See the table below for the cable housing
length suggested.
Suggested lengths of the cable housing*
(the medium frame is used as a reference)
* For guidance purposes only. Can vary according to the shifters used.
Cable housing/length
FRONT brakes
(KEB leftover)
REAR brakes
(Gray EZ-Bend housing)
FRONT derailleur
REAR derailleur
40cm
106.5cm
140cm
198cm
XS
41cm
108cm
142cm
200cm
S
43cm
110cm
144cm
202cm
M
45.5cm
112.5cm
150cm
204cm
L
15
E-118 NEXT 216A: 5. Cable housing installation
5.1
5.2
5.4
5.3
