16
V 07/22
appliance. Remove accumulated dust, after taking the plug out, by
cleaning the grilles using a vacuum cleaner.
• Do not use any abrasive products to clean the appliance. Clean it
using a damp (not wet) cloth rinsed in soapy water. Remove the plug
from the socket before performing any maintenance.
• To disconnect the fan heater, turn the switch to OFF and remove the
plug from the socket. Pull on the plug only. Do not pull on the cable
when turning off the fan heater.
• Do not place any objects on the cable and also avoid bending the
cable.
• Using extension leads are not recommended as they may overheat
and cause a fire hazard. Never use a single extension lead to operate
multiple appliances.
• Do not immerse the power cable, plug or any other part of the appliance
in water or other liquids.
• Do not touch the plug with wet hands.
• Do not place the fan heater above or near another heat source.
WARNING: AVOID COVERING THE FAN HEATER TO PREVENT IT
FROM OVERHEATING.
The symbol below signals this warning:
• The fan heater may cause the risk of fire if, while operating, it is covered
or comes into contact with
flammable
material including curtains,
drapery, blankets, etc.
KEEP THE FAN HEATER AWAY FROM THESE
MATERIALS.
• Do not connect the fan heater to the power supply until it has been
correctly assembled or positioned.
• Do not run the cable under carpets. Do not cover the cable with blankets,
carpets or similar materials. Place the cable away from busy areas and
where it cannot accidentally be pulled out.
• Do not operate the fan heater in close proximity to bathtubs, showers,
washbasins or pools.
• Do not use in bathrooms.
• Do not position the fan heater beneath a power socket.
• Do not operate the appliance outdoors.
• Upon initial start-up, the fan heater may emit a slight, harmless smell.
