25
V 02/22
CLEANING THE WATER TANK
We advise removing the tank once every two weeks to prevent mould and bacteria forming on it. Fill the tank with clean
water a small amount of detergent; swill the water around in it, then it out and rinse it thoroughly.
CLEANING THE AIR FILTER
1
The filter is designed to remove dust or dirt from the air.
If the filter is clogged by dust, electricity consumption will be
higher than normal.
Cleaning instructions:
1. Remove the water tank, then remove the filter by
pulling it out from below, following the direction of
the arrow.
Clean the filter by washing it with warm soapy water
DO NOT USE ALCOHOL, BENZENE OR OTHER
AGGRESSIVE PRODUCTS
Allow the filter to dry naturally, then insert it back
into its housing.
Do not use hair dryer or fire to dry the filter
Do not use sponges or brushes to clean the filter as
they can damage it
2. 2. Reposition the filter by inserting it as indicated by
the arrow and replace the water tank.
Do not use the dehumidifier without the filter as dust
may affect the efficiency of the evaporator, resulting
in higher energy consumption.
CONSERVATION AND STORAGE
If the unit is not used for a long period of time, it is necessary to carry out the following operations before storing it.
1. Turn off the device with the Power button and unplug the power cord from the power outlet.
2. Eliminate the water deposited in the water tank and dry it thoroughly
3. Clean the air filter and let it dry completely
4. Place the power cord in the water tank
5. Replace the filter
6. Store the device in an upright position and in a cool, dry and ventilated place.
2