12
EN
FOrCe rUNNiNG
When jammed, please set to Fwd, the shredder will be forced to shred.
MOTOr PrOTeCTiON
When the wording „Machine overheat.” is shown on Lcd, unplug the machine from the
main power source. allow the motor to cool down to room temperature before resuming
operation.
CUTTer OiliNG iNsTrUCTiONs
To ensure proper operation and function, periodic oiling of the cutting system is required.
Failure to oil your cutting system could result in reduced sheet capacity performance,
excess noise, paper jams and possibly machine failure. Oil your cutters every 5th or 6th
time you empty the basket, if excess squeaking and rubbing noise is coming from the ma-
chine or if the shredders sheet capacity has diminished.
squeeze the lubricant across the full width of the cutters. insert paper in-
to sensor (fig.2) to activate the cutting system forward for 3 seconds. Then
press „reV” to make shredder reverse for 3 seconds. alternate between for-
ward and reverse at least three times or until all paper clears the cutters.
CaUTiON:
Never use flammable synthetic oil, petroleum based or aerosol
lubricants to oil your cutting system. Use only a vegetable oil based lubricant in a
non-aerosol container with extension nozzle:
BasiC eXPlOiTaTiON rUles
it is not advised to cut as many shreets as indicated as the maximum capacity of the
shredder. By exploiting the machine at it's top capacity we significantly reduce it's vitality.
Therefore, to maintain a durable and faultless work of the shredder, it is adviced to place
no more then 70% of the maximum amount of sheets to be shred at one time indicated
for each model by the producer. The maximum amount of sheet should be used only oc-
casionally.
I O R
Fwd
Smart
© arGO s.a.
www.argo.pl
