43
SECTION 7
MAINTENANCE INFORMATION
7.3.6 BRAKE PLUNGER ADJUSTMENT
IMPORTANT
It is critical that the master cylinder pistons are adjusted
properly when the steering handlebars are in the cen-
tred position. Overheating of the brake system could
occur due to an improperly adjusted brake system. Any
suspected issues related to the steering performance of
your vehicle should be immediately addressed by a local
authorized ARGO dealer.
7.3.7 BRAKE COOLING SYSTEM
Some vehicles are equipped with a 12 volt fan forcing cool air
from outside the engine compartment onto the brake compo-
nents to protect the system from overheating. Overheating can
damage the hydraulic brake components. Make sure the brake
cooling fan is operating when the vehicle is being driven. The
fan operates when the ignition switch is in the “run” position.
Keep the brake cooling system in good working order by:
•
cleaning debris from the air intake screen and ducts.
•
keeping electrical connections tight and components se-
curely mounted.
7.3.8 ENGINE COOLING & EXHAUST SYSTEM
Engine cooling air is drawn in on the right side of the engine
compartment and expelled with the exhaust on the left side.
Keep all ducting and screening in place.
If the vehicle is equipped with an enclosed cab of any
sort, make sure there is plenty of ventilation to avoid
exposure to exhaust and engine fumes. Engine exhaust
contains carbon monoxide; an odourless, colourless
toxic gas that will cause serious personal injury or death.
Inspect the exhaust system periodically for worn or
damaged components. Listen for a change in exhaust or
engine noise that may indicate a dangerous exhaust leak.
If a leak is detected, have the exhaust system repaired
immediately before further use.
Check the area around the exhaust system periodically
for accumulated debris, particularly when travelling
through dry vegetation. Failure to inspect and clean
the exhaust system on a regular basis may create a fire
hazard.
The tail pipe exiting through the left side of the upper
body becomes very hot when the vehicle is operated. DO
NOT ALLOW ANYONE TO TOUCH THE EXHAUST
COMPONENTS. A SEVERE BURN CAN RESULT.
An annual complete check over of your ARGO vehicle
is recommended. This will reduce maintenance costs
over the life of your vehicle and ensure it will function
properly during use periods.
7.4 DAILY CHECKLIST - Minimum Recommendation
♦ Check/Clean Air Intake Screen
♦ Check/Clean Exhaust Screen
♦ Check Parking/Emergency Brake (Cable Inspection)
♦ Check Handbrake (Cable Inspection)
♦ Check Fuel Level
♦ Check Tire Inflation
♦ Check Oils (Engine & Transmission)
♦ Check Throttle Cable Operation
♦ Check Drain Plug Installation
♦ Check Electrical, Lights, Wiring, Horn (if equipped)
♦ Check/Clean Hood Screen
♦ Check Steering And Braking Operation
Summary of Contents for Frontier 600 6x6
Page 70: ...62 NOTES...
Page 71: ...63 NOTES...