![background image](http://html.mh-extra.com/html/argo/fancy/fancy_operating-instructions-manual_2967611004.webp)
V 05/21
17
Do not immerse the cord, plug or any other element of the panel in
water or other liquids.
Do not touch the plug or convector with wet hands.
Avoid using the convector in dusty environments or in the presence
of flammable vapors (e.g. in workshops or garages).
Do not place the convector above or near another heat source.
WARNING: AVOID COVERING THE CONVECTOR TO PREVENT IT
FROM OVERHEATING
.
The symbol below signals the above warning:
The convector may cause risk of fire if, while in operation, is covered
by or comes into contact with
flammable
material including curtains,
drapery, blankets, etc.
KEEP THE CONVECTOR AWAY FROM
THESE MATERIALS
.
Do not insert and avoid accidental insertion of any external objects
into the ventilation or discharge outlets as this may lead to electric
shock, fire or damage the convector.
A convector contains parts that generate arcs or sparks. It must not
be used in potentially dangerous areas such as areas at risk of fire
or explosion, or areas loaded with chemical substances or humidity.
Do not use the convector on soft surfaces such as beds, where the
grilles may be covered. Always stand the convector on a flat, stable
surface when in operation, in order to prevent it from overturning.
Arrange the cord in such a way that the convector and other objects
do not rest on it. Do not run the cord under carpets. Do not cover the
cord with blankets, carpets or similar materials. Place the cord far
away from busy areas, or in a place where it cannot be accidentally
pulled-out.
Never position the convector where it may fall into a bath or other
containers of water.
Never position the convector on a wet floor.
In any case, the adjustment switches must never be accessible by
anyone in a bath or shower.
The heating appliance must not be positioned immediately below a
power outlet.
The socket must be earthed.