Argo EVAN PLUS Operating Instructions Manual Download Page 5

 

V 01/22

 

24

 Make sure the power outlet is intact, and after plugging the power 

cord into the outlet, check that the cord is placed where it cannot be 
walked on to prevent it from being accidentally pulled out of the 
outlet. 

 

 

PRECAUTION! 

 

Do not insert any objects into the air conditioner: this is very 
dangerous as the fan turns at high speed.

 

 

Ensure that air circulates freely around the unit. Do not cover 
the air intake and delivery grilles with drapes or any other 
means. 
 

WARNING! 

 The air conditioner must be positioned 

at least 50 cm 

from the wall 

or any other obstacles, on a flat and stable surface so as to avoid 
water leaks. 

 

The air conditioner is fitted with a system for protecting the 
compressor from overload. This means that the compressor 
only starts 3 minutes after its previous stoppage.

 

 

Please wait at least 3 minutes before starting the unit. This helps 
prevent the compressor from being damaged. 

 

 
WARNING! 
In the event of an anomaly, switch the appliance off and unplug 
it from the socket. Do not dismantle or attempt to repair or modify 
the product. In the event of a malfunction, contact the service 
centre directly. 
 
WARNING! 

 

Do not expose the air conditioner to direct sunlight, as the 
colour of the materials may change; moreover, the appliance 
may overheat causing the protection mechanism to intervene 
and switch the appliance off. 

Summary of Contents for EVAN PLUS




















Reviews: