V 01/22
29
4. VENTILATION MODE (FAN ONLY)
Press the MODE button until the Fan icon appears.
In this mode, the fan speed can be adjusted.
The temperature cannot be adjusted.
HOW TO ELIMINATE CONDENSATE
This appliance automatically vaporizes the condensation in cooling.
When the air conditioner operates in
Cooling
, it is not necessary to have continuous condensate drainage; only in
particular climatic conditions in which the air humidity is very high, it can happen that water is deposited inside the unit.
In
heating
the condensate is not vaporized automatically, it will therefore be necessary to empty the tank periodically.
Alternatively, drainage can be arranged from the lower hole on the back of the unit, the condensate drain will be
intermittent.
When the internal tank is full, the air conditioner will emit 8 beeps and the display will show the
message "FL", signaling the filling and blocking the operation of the device.
Cooling and Heating
When the unit operates in the cooling and heating mode, ensure that the
rubber cap closing the drainage opening on the back of the appliance is
properly positioned.
To empty the container, switch the air conditioner off and unplug the
cord. Remove the cap from the rear drainage opening and place its end
over a normal drain. Ensure that the tube is not twisted or bent. The tube
must slope downwards. Re-close the drainage opening with the cap,
insert it into the clamp and resume use of the air conditioner.
Dehumidification
WARNING!
When using the air conditioner in dehumidification mode, we recommend always ensuring continuous drainage, in order
to maximise dehumidification efficiency.
Use the drainage outlet on the appliance. The water can be drained into a drain by simply connecting the supplied
drainage tube.
1. Remove the cap then remove the plug.
2
.
Next, insert the drainage tube into the connection tube.
Avoid bends in the drainage tube. When you want to stop continuous drainage, always replace the rubber plug and cap.
