Argo EVAN PLUS Operating Instructions Manual Download Page 15

 

V 01/22

 

34

4. Transport.  

Preferably keep the air conditioner in the vertical position when 
transporting it.  
Should this not be possible, rest it on its right-hand side; when it 
reaches its destination, immediately put the appliance in the 
vertical position and wait at least 4 hours before using it in the 
cooling mode. 
 

 

5. For complete safety, regularly check the condition of the power cord; should it be damaged through use, 
contact the Service Centre to replace it. 

 

TIPS FOR MAXIMISING COMFORT AND MINIMISING CONSUMPTION

 

 
CHECK that: 

 

the unit's extraction and delivery grilles are always unobstructed;

 

 

the air filters are always clean: a dirty filter will decrease the passage of air and thus reduce the unit 
performance; 

 

the doors and windows are closed, to avoid infiltration of unconditioned air; 

 

the flexible hose is correctly positioned, without folds or sharp bends; 

 

the room temperature is above 18 ºC for the cooling mode, and above 10 ºC for dehumidification mode. 
 

 
 
 
 
 

REGULATION (EU) No. 517/2014 – F-GAS  

 

EVAN PLUS 
The unit contains R290, a natural greenhouse gas with global warming potential (GWP) = 3  - Kg. 0,21 = 
0,00063 Tons CO

2

 equiv. 

Do not release R290 into the atmosphere. 

 

 
 
 
 
 

 

INFORMATION FOR THE CORRECT DISPOSAL OF THE PRODUCT pursuant to art. 26 Legislative Decree 
14/03/14, no. 49 "IMPLEMENTATION OF EUROPEAN DIRECTIVE 2012/19 / EU ON WASTE FROM 
ELECTRICAL AND ELECTRONIC EQUIPMENT" 

At the end of its useful life, this appliance must not be disposed of with household waste. We recall the important 
role of the consumer in contributing to the reuse, recycling and other forms of recovery of such waste. 
The device must be delivered separately to appropriate municipal collection centers or free of charge at retailers, 
upon purchase of a new equivalent type of equipment. 
For products with an external dimension of less than 25 cm, this free waste collection service must be provided 
free of charge by large retailers (sales area of at least 400m2) even if no equivalent equipment is purchased. 
Disposing of an electrical and electronic device separately allows you to avoid possible negative effects on the 
environment and human health resulting from inappropriate disposal and allows you to recover and recycle the 
materials it is made of, with important savings in energy and resources. 
To emphasize the obligation to dispose of these equipment separately, the product bears the crossed out bin 
symbol. 

 

 
 
 

 
 

 
 

Summary of Contents for EVAN PLUS




















Reviews: