manualshive.com logo in svg

Argo AEG ECO 100PIH, User And Installation Manual

Share
Download
Argo AEG ECO 100PIH User And Installation Manual Download Page 284

7

LIGHT button

14

Press this button to turn off display light on indoor unit. "       " icon on remote 
controller disappears. Press this button again to turn on display light. "       " icon is 
displayed.

Introduction for buttons on remote controller

15

TEMP button

By pressing this button, you can see indoor set temperature, indoor ambient temp-
erature or outdoor ambient temperature on indoor unit’s display. The setting on
remote controlleris selected circularly as below:

no display

● When selecting "     " or no display with remote controlle

r, temperature indicator 

   on indoor unit displays set temperature.

● When selecting "     " with remote controlle

r, temperature indicator on indoor unit

   displays indoor ambient temperature.

● When selecting "      " with remote controlle

r, temperature indicator on indoor unit

   displays outdoor ambient temperature.

Note:

●

Outdoor temperature display is not available for some models. At that time, indoor

unit receives "       " signal, while it displays indoor set temperature.

● It

’s defaulted to display set temperature when turning on the unit.There is no

display in the remote controller.

● Only for the models whose indoor unit has dual-8 displa

y.

● When selecting displaying of indoor or outdoor ambient temperature, indoor

temperature indicator displays corresponding temperature and automatically turn

Summary of Contents for AEG ECO 100PIH
































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands