Argo AEG ECO 100PIH, User And Installation Manual

Page: 105 / 287

DC Inverter Package R32 Duct Type Unit
31
the refrigerant used. Leak detection equipment shall be set at a percentage of the
LFL of the refrigerant and shall be calibrated to the refrigerant employed and the
appropriate percentage of gas (25% maximum) is confirmed.
Leak detection fluids are suitable for use with most refrigerants but the use of
detergents containing chlorine shall be avoided as the chlorine may react with the
refrigerant and corrode the copper pipe-work.
If a leak is suspected, all naked flames shall be removed / extinguished. If a
leakage of refrigerant is found which requires brazing, all of the refrigerant shall be
recovered from the system, or isolated (by means of shut off valves) in a part of the
system remote from the leak. Oxygen free nitrogen (OFN) shall then be purged
through the system both before and during the brazing process.
3.2.5 Refrigerant Adding
NOTE!
Before and during operation, use an appropriate refrigerant leak detector to
monitor the operation area and make sure the technicians can be well aware of
any potential or actual leakage of inflammable gas. Make sure the leak detecting
device is applicable to inflammable refrigerant. For example, it should be free of
sparks, completely sealed and safe in nature.
See the following table for the amount of additional refrigerant.
Item
Model
Standard
Pipe Length
Unnecessary
Charge Pipe
Length
Additional
Refrigerant Amount
for Extra Pipe
AEG ECO 35PIH
5.0m
≤7.0m
16 g/m
AEG ECO 50PIH
AEG ECO 70PIH
25 g/m
AEG ECO 85PIH
30 g/m
AEG ECO 100PIH
35 g/m
AEG ECO 100PIH3
AEG ECO 140PIH
7.5m
≤ 9.5m
40 g/m
AEG ECO 140PIH3
AEG ECO 160PIH3