Argal ASTRA Evo DDE 030, Operator And Maintenance Manual

Page: 17 / 62

Operations & maintenance manual – ASTRA evo (DDE)
ARGALAIR 2020 | Rev. 6 17
Note: To lift the pump, use the handle provided on all the ASTRA DDE pump models.
WARNING: The DDE 400 and DDE 650 pumps must not be lifted manually. To lift them it is necessary
to provide special lifting hooks/accessories, to be connected to the pump discharge manifold.
1.1 RECEIVING INSPECTION
•
Check the shipment on receipt.
•
Check that the packing and the pump are intact and they have not been damaged - make sure
that all parts and accessories listed on the packing list are accounted for.
•
Take the Use Manual and operate as described.
1.2 STORAGE
•
If the equipment is to be stored prior to installation, place it in a clean location.
• Do not remove the protective covers from the suction, discharge and air connections which have
been fastened to keep pump internals free of debris.
• The pump has to be protected from wetness, coldness, dirtying, UV-radiation.
•
Store the pump in an original packaging. The package should be stored raised from the ground, in a
closed, clean and dry environment.
•
In the event that the package is not whole at the time of receipt, it is necessary to release the pump
from the package, verify its integrity and restore a new package.
•
The storage location must be a closed room with a temperature not lower than -5°C not exceeding
40°C and with a moisture content not exceeding 90%.
•
The packing event should not be subjected to shocks, vibrations and overloads.
• Clean the pump thoroughly before installation.