ARESA AR-1703, Instruction Manual

Page: 6 / 15

ENGLISH
OPERATION
ATTENTION! Before assembling the food processor, make sure that the appliance is not connected to the mains.
Remove the appliance and accessories from the packaging. Do not leave packing materials (bags, polystyrene, etc.) in accessible places for children to
avoid dangerous situations.
Clean the appliance with a damp soft cloth. Be sure to wash all accessories in accordance with the recommendations described in the "Transport, cleaning
and storage" section. The food processor is designed for grinding, whipping, slicing, shredding, mixing, as well as for the preparation of pancakes and
mashed potatoes. Attention! Before processing products should be cut into pieces.
WHISK USAGE
Attention! Before assembling the device, make sure it's not switched on to the mains.
Use the whisk attachment to whip cream, egg whites, biscuit dough, mashed potatoes, soup, sauce, etc.
1. Insert a whisk for beating into the hole in the gearbox until it clicks.
2. Install the whisk gear (with the installed whisk attachment) on the motor part until it clicks.
3. Plug the appliance into the mains. Place the whisk into the bowl and select the speed of operation "1" or "2" and
press the speed button. When operating in the 1st mode with the speed regulator, you can adjust the speed of the
whisk. To do this, while holding down the first mode button, move the speed control knob to the right or left,
respectively, to increase or decrease the speed of rotation of the whisk. You can use the measuring cup from the
set or any other suitable container.
4.After the end of the work, wait till the full stop of the whisk and remove it from the bowl. Disconnect the unnit from the mains. Then detach the whisk
from the motor part of the food processor.
DETACHABLE BLENDER HEAD USAGE
Attention! Before assembling the device, make sure it's not switched on to the mains.
This unit is ideal for making cream soups, sauces and dressings, baby food, and also for blending various cocktails.
1. Place the detachable blender head on the motor base until its full fixation (click sound).
2. Connect the unit to the mains supply and insert the blender into a bowl. Choose the speed "1" or "2" and press the
switch on buttton.
When operating in the 1st mode with the speed regulator, you can adjust the speed of the blender. To do this, while
holding down the first mode button, move the speed control knob to the right or left, respectively, to increase or
decrease the speed of rotation of the blender.
3. When finished, disconnect the unit from the mains. Wait until the full stop og the choppong blade. After detach the
blender head fro mthe motor part. The operation principle of the mashed potatoes head is the same as the detachable
blender head. Attention! The blade is very sharp!
CHOPPING BLADE USAGE
Attention! Before assembling the device, make sure it's not switched on to the mains.
Chopper is ideal for chopping greenery and vegetables, cheese, majority of nuts, dried fruits. Hard products,
such as meat, onion, carrots, need to be cut before processing. Nutshells must be removed, meat must be
separated from bones and tendons.
1. Place the chopping blade into the chopper.
2. Place the ingredients into the chopper. Install the chopper lid to the chopper turning it clockwise until the click.
3. Install the motor part (as is shown in the photo). Connect the unit to the mains. Select the speed of operation
"1" or "2" and press the speed button. When operating in the 1st mode with the speed regulator, you can adjust the speed of the blade. To do this, while
holding down the first mode button, move the speed control knob to the right or left, respectively, to increase or decrease the speed of rotation of the
chopping blade.
Attention! The chopping blade is very sharp!
POTATO SHREEDING/SLICING/SHREDDING DISC USAGE
Attention! Before assembling the device, make sure it's not switched on to the mains.
1. Install the desired disc to the attachment axle, then place it to the bowl (as is shown in the photo).
2. Install the chopper lid, turning the clockwise u ntill the click.
3. Place the motor part as is shown in the photo. Connect the unit to the mains. When operating in the
1st mode with the speed regulator, you can adjust the speed of the disc. To do this, while
holding down the first mode button, move the speed control knob to the right or left, respectively, to
increase or decrease the speed of rotation of the disc.
The discs are designed for slicing and chopping vegetables, such as cucumbers, carrots,potatoes,
leeks and onions, as well as some kinds of cheese.
4. When finished, disconnect the unit from the mains. Wait until the full stop of the disc. Detach the motor
part, the lid and take out the disc and attachment axle. After pour the prrepared product into the container.
Attention! Take the discs carefully as they are very sharp.
• Do not allow children to touch the body of the motor unit, the power cord or the power plug during operation of the unit.
• Do not leave children unattended to prevent using the unit as a toy.
• During the unit’s operation and breaks between operation cycles, place the unit out of reach of children.
• Close supervision is necessary when children or disabled persons are near the operating unit.
• This unit is not intended for usage by children.
• Do not use the unit if the power cord or plug is damaged, if the unit works improperly or after it was dropped.
• Do not attempt to repair the unit. Do not disassemble the unit, if any malfunction is detected or after it was dropped, unplug the unit and apply to any authorized service
center.
• To avoid damages, transport the unit in the original package only.
• To avoid risk of electric shock or fire, do not immerse the unit body, the power cord and the power plug into water or any other liquids.
• Before using the appliance, make sure that the bowl of the вумшсу is properly installed, the lid is closed until it is completely locked (until it clicks).
• Before removing the bowl from the motor part, or before removing the lid from the bowl, always turn off the appliance and wait for the disc to stop completely before cleaning.
• Before disassembling, make sure that the motor has completely stopped.
• Do not put your fingers or other objects into the open bowl while the appliance is operating. If fruits / vegetables are stuck, use a pusher or other fruit or vegetables to
push them. If this does not work, turn off the appliance and disassemble it to reach for the stuck fruit / vegetables.
• Before switching on, be sure to install the components of the food processor correctly.
• Do not use accessories that are not included in the delivery.
• Metal discs are very sharp, be extremely careful in handling. Take the objects away from the cutting edges when you use them.
• Always remove the disc before pouring the ingrdients out of the bowl.
• Don’t operate the unit with wet hands.
• Keep this instruction manual.
ATTENTION! Never operate the appliance for more than 2 minutes continuously. After a 2-minute continuous operation, the device must be turned off for a minimum of 2
minutes. Do not operate the appliance until it cools down.
• Do not exceed the maximum allowed amount of product in the bowl.
• The temperature of the product should not exceed 50 ° C.
• Do not use the device and its accessories in the microwave oven.
• Never turn on the device if it is empty.
• Do not insert fingers or other objects into the opening of the cover.
• Do not use the appliance for hard ingredients (for example: frozen foods, etc.) and inedible parts of products (for example: pits from fruit, meat cartilage, bones, etc.).
TRANSPORTATION. Transportation of the device is necessary by any kind of covered transport with the application of rules fastening of cargoes ensuring
preservation of the presentation of the product and / or packaging and its further safe operation.