Ares Chronos CX 100, Instruction Manual

Page: 6 / 36

6
PLEASE NOTE: This checklist is NOT intended to replace the content included in this instruction
manual. Although it can be used as a quick start guide, we strongly suggest reading through this
manual completely before proceeding.

Remove and inspect all contents

Plug the dual port DC USB charger into a suitable USB power source

Begin charging the LiPo flight battery (connect the helicopter to the charger directly or
connect the battery to the charger using the included adapter leads)

Install the six (6) AA batteries in the transmitter

Familiarize yourself with the controls

Turn the transmitter on first then turn the helicopter on

Test the controls to confirm proper operation

Find a suitable area for flying
PLEASE NOTE: This checklist is NOT intended to replace the content included in this instruction
manual. Although it can be used as a quick start guide, we strongly suggest reading through this
manual completely before proceeding.

Always turn the transmitter on first

Turn the helicopter on (after the transmitter is turned on)

Allow the control unit to initialize and arm properly (on a flat/level surface)

Fly the model (take ‐ off from a flat/level surface)

Land the model (land on a flat/level surface)

Turn the helicopter off (before the transmitter is turned off)

Always turn the transmitter off last
Before the First Flight Checklist
Flight Checklist