Full manual available to download from: www.Ares-RC.com
15
With the control surfaces centered,
connect the elevator and rudder
clevises to the outer hole of each
control horn noting that you may
have to screw the clevis in or out
to ensure that the control surface
remains in the neutral position.
16
Check that the ailerons are
centered and, if not, adjust the
clevises to suit.
17
Check that the control surfaces
operate in the right direction. With
the model in front of you, facing
away, move the rudder stick to
the left and check that the rudder
moves left in response. Right
rudder stick will move the rudder to
the right.
18
Pull the elevator stick back and
check that the elevator moves in an
upward direction. Push the elevator
stick forward and check that the
elevator moves in a downward
direction.
19
Moving the aileron stick to the right
should cause the right- hand aileron
to move in an upward direction
whilst the left- hand aileron moves
downward. Moving the aileron stick
to the left will have the opposite
effect.
