QUICK-START GUIDE
Full manual available to download from: www.Ares-RC.com
1
Remove the components from
the box and ensure you have the
following parts: Fuselage assembly,
a left- and right- hand wing panel,
stabilizer, fin and rudder, carbon
main spar, charger, mains adaptor,
Li- Po battery, propeller, tool set.
This Quick Start guide is written for the RTF (Ready to Fly) version of the Alara.
If you have the PTF (Pair to Fly) version, your model comes complete with a pre-installed
Hitec Red-enabled receiver. Simply pair (connect) with your existing 2.4GHz Hitec or Hitec
Red-enabled transmitter using the pairing guide on last page of this Quick Start guide.
A full instruction manual is available to download from www.ares-rc.com
2
Slot the fin and stabilizer together.
3
Position the fin and stabilizer
assembly in its molded recess at
the tail end of the fuselage.
4
Insert the two M3 x 40mm
machine screws from the
underside and tighten until the tail
assembly is securely fixed.
