4/8
CO670L
REAR PANEL / TERMINAL BOARD
(9) DMX IN/OUT (XLR3 pin)
(10) DMX IN/OUT (RJ11, phone jack)
(11) Output terminal board
(12) Power input terminal board (20A each phase)
INSTALLING THE UNIT
The unit must be fixed on a suitable support which
remains stable during operation. Always make
sure the rack or structure to which you are setting
the unit is secure and is able to bear the weight of
7 kg of each unit.
Disconnect the mains voltage from the system.
In the following connection diagrams you can find
how to connect to the mains voltage for both
Three Phase System and Single Phase System.
Respect the LNE polarity indicated on the
terminals (color brown = L1 or L, black = L2, grey
= L3, blue = N, yellow / green = E).
It is essential that each unit is correctly earthed
and that electrical installation conforms to all the
standards of good practice and safety regulations.
It is recommended that the unit is connected to
the mains via a proper circuit breaker.
Use the on/off switch to turn on and off the
dimmer pack.
9 10
11
11
11
12
