Arena Luci CO670L User Manual Download Page 2

2/8

CO670L

This  unit  should  only  be  used  for  purpose  for 
which  it  has  been  intended  and  should  be 
installed  using  the  instructions  which  are 
provided.  Arena  Luci  cannot  be  held  liable  for 
damages  to  person,  animals  or  objects  as  a 
result  of  improper,  unreasonable  and  wrong 
usage.
This  instruction  manual  contains  important 
information  about  the  installation  and  use  of  the 
projector.  Please  read  and  follow  these 
instructions carefully.
The  security  of  this  device  is  guaranteed  only 
with  the  proper  use  of  the  following  instructions, 
therefore they must be kept carefully.
Never  install  the  device  in  locations  easily 
accessible by people who ignore the existence of 
this user's manual and safety instructions.
Disconnect the unit from any power supply before 
attempting  any  operation  in  contact  or  inside  the 
unit, and when not in use.
It  is  essential  that  each  device  is  correctly 
earthed and that electrical installation conforms to 
all  relevant  standards.  Never  supply  the  unit 
without the earth link.
Prior  to  connect  the  unit  to  the  mains  supply, 
check  the  output  voltage  fits  the  technical 
requirements on the label.
Never  let  the  power  cord  come  into  contact  with 
other cables.
Never touch the electrical contacts, either directly 
with your fingers, or indirectly by means of sharp 
or metal objects.

Make sure that cables cannot cause trip hazard.
Do not attempt to dismantle and modify the unit.
Due  to  the  high  technological  level  of  this  unit, 
any service maintenance should be performed by 
specialised operators. Please contact your Arena 
Luci dealer for any operation.
Always ensure that the structure to which you are 
attaching the unit is secure and is able to support 
the weight of each unit.
Do  not  allow  contact  with  water  or  any  other 
fluids, or metallic objects (IP 20).
Do  not  install  the  projector  in  areas  of  high 
humidity.  The  unit  is  intended  only  for  indoor 
purposes.
Avoid installing the unit close to heat sources.
Never lean the power cord on hot unit surfaces.
Not  allowed  to  be  mounted  directly  on 
inflammable surfaces.
Install the unit where it can be easily aerated.
Avoid obstruction of in/out vents.
Maximum ambient temperature 35°C.
If  the  unit  is  installed  in  a  rack,  then  the 
temperature inside the rack must be below 45°C.
Relative Humidity between 40% and 80%.
Do  not  use  any  solvent  based  cleaning  agents. 
Use only a soft, dry anti­static cloth.
The  installation  should  be  performed  only  by  a 
qualified operator.
Avoid  contact  with  either  corrosive  agents  or 
humidity  and  moisture  on  delicate  elements: 
damages  from  corrosion  are  not  refunded  as 
component defects.

WARNINGS

Please  note  that  as  part  of  Arena  Luci's  ongoing  commitment  to  continuous  product  development, 

specifications  are  subject  to  change  in  the  course  of  product  improvement  without  notice. Arena  Luci  is  not 

responsible for damages resulting from improper or different use than expected.

Summary of Contents for CO670L









Reviews: