Arecont Vision H.264 Color or Day/Night SurroundVideo
®
Series Installation Manual
3 | P a g e
5.
If you are using the side conduit opening on
the surface mount, remove the conduit plug
by first removing the socket set screw using
the provided Allen key
(Image 7)
and remove
the conduit plug using a flat screwdriver.
Note: the conduit fits ¾” NPT standard
Image 7
Connecting External Power: (Optional)
6.
If the camera is powered by an outside power
supply, 12~48VDC or 24VAC, connect the
power cable shown in
Image 8
.
Red
+
Black
–
Table 1
NOTE: Make sure that your installation of
wires complies with Electrical Code of the
local government where the camera is
installed and no bare wires are exposed.
Image 8
External camera
Power input
RJ45 Connector
Digital I/O connector
Heater & Blower
Power input
Heater & Blower
Power input
Conduit Plug