Arecont Vision H.264 Color or Day/Night SurroundVideo
®
Series Installation Manual
13 | P a g e
H.264 SurroundVideo
®
Corner Mount Adapter AV-CRMA Installation Instructions
Inside the box:
A. Corner Mount Adapter
B. Pack of four (4) machine screws (#8-32
5/8”), twelve (12) screws, twelve (12)
anchors, and twelve (12) washers
Not included but needed:
#2 Phillips head screw driver
SV-WMT, Wall Mount Adapter
SV-JBA (Junction box adapter)
Image 38
1.
Remove Corner Mount Adapter and hardware
from the box.
2.
Attach SV-JBA (Junction Box Adapter) to
Corner Mount Adapter as shown in
Image 39
.
3.
Remove the conduit plug on Junction box
adapter and connect ¾” NPT Conduit to
Junction Box Adapter shown in
Image 40
.
NOTE: Use silicon or water pipe seal tape to
make sure no water leakage between conduit
pipe and junction box adapter.
4.
Run the Ethernet cable and outside power
cable (if necessary) through the Junction Box
Adapter and SV-WMT, Wall Mount Adapter.
5. Attach SV-WMT, Wall Mount Adapter, to
Corner Mount Adapter as shown in
Image 40
.
6.
Using the screws provided (or other hardware)
to attach the Corner Mount Adapter to an
exterior 90° corner wall.
7. Attach camera with in-ceiling mount to Wall
Mount Adapter. P
lease reference “
Mounting
the Camera
”, if needed.
Image 39 Image 39-1
Image 40