Arecont Vision H.264 Color or Day/Night SurroundVideo
®
Series Installation Manual
12 | P a g e
H.264 SurroundVideo
®
Pole Mount Adapter AV-PMA Installation Instructions
Inside the box:
A. Pole Mount Adapter
B. 2x Small Steel Straps
C. 2x Large Steel Straps
D. Pack of four (4) machine screws (#8-32
5/8”)
Not included but needed:
#2 Phillips head screw driver
SV-WMT, Wall Mount Adapter
SV-JBA , Junction box adapter
Image 35
1.
Remove Pole Mount Adapter, steel Straps
and hardware from the box.
2.
Attach SV-JBA (Junction Box Adapter) to Pole
Mount Adapter as shown in
Image 36
.
3.
Remove the conduit plug on Junction box
adapter and connect ¾” NPT Conduit to
Junction Box Adapter shown in
Image 36-1
.
NOTE: Use silicon or water pipe seal tape to
make sure no water leakage between conduit
pipe and junction box adapter.
4. Run the Ethernet cable and outside power
cable (if necessary) through the Junction Box
Adapter and SV-WMT, Wall Mount Adapter.
5. Attach SV-WMT, Wall Mount Adapter, to Pole
Mount Adapter as shown in
Image 37
.
6. Use the supplied two Steel Straps to attach
the Pole Mount Adapter to the pole and
tighten the compression screws as shown in
Image 37
7. Attach camera with in-ceiling mount to Wall
Mount Adapter. P
lease reference “
Mounting
the Camera
”, if needed.
Image 36 Image 36-1
Image 37