Original User Manual
–
A
REBO
S Hydraulic Trolley Jack 3 Ton
4
1.2 General safety instructions
•
This jack is designed for lifting objects only and shall be supported by an adequate
aid, such as a stand.
•
Make sure that the lifted object is firmly fixed to the jack.
•
Do not use the jack while persons are in or leaning against the vehicle.
•
Do not exceed the permissible load.
•
Do not use any extensions other than those attached to the jack.
•
Wear safety glasses during work.
•
Use the jack only on a firm surface that can support the load.
•
Make sure that the jack is central and stable with its support saddle under the object
and the lifting point.
•
You must ensure that the safety instructions and labels are always clearly visible and
not soiled. If they need to be replaced, contact your supplier.
•
Read the supplied instructions carefully before use.
•
Failure to follow these instructions can lead to damage to the lift and/or the vehicle
and/or a person.
•
This manual should be kept in a safe place so that it can be used and/or maintained
at a later date.
•
This jack is filled with high quality hydraulic oil. Use suitable hydraulic oil at extremely
low temperatures. Use only high quality oil. Avoid mixing different oils. Never use
brake fluid, alcohol, cleaning agents, turbine oil, gear oil, engine oil or glycerin or
contaminated oils. The latter can cause damage to the jack or impair its function.
•
Never adjust the adjusting screws on the hydraulic unit.
•
The operator should watch the lifting device and the load during all movements.
•
It is not allowed to work under the raised load until it is secured by suitable means.
•
This jack is for lifting purposes only and it is not designed for the lifting of person.
•
The hydraulic jack could not be operated in potentially explosive atmosphere and
severe conditions, e.g. extreme climates, freezer application and strong magnetic
fields.
•
The hydraulic jack could not be operated in potentially explosive atmospheres, e.g.
mines.
•
Be careful of handling of loads, the nature of which could lead to dangerous
situation, e.g. molten metal, acids, radiating materials, especially brittle loads.
•
The A-weighted emission sound pressure level of this product is less than 70dB(A).
•
Maybe residual risks unspecified in the label could be remained; always wear PPE
during the operation.
•
The product is not allowed to operate on sea ships.
•
The jack is designed to work at rated load in a temperature range of -20°C to +50°C.
•
No modifications shall be carried out which adversely affect the compliance of the
jack with standard EN 1494 or the essential requirements of the Machinery Directive
2006/42/EC.
