10
User Manual
Arduino Materia 101
assembling the
sPOOl-hOlder
To assemble the spool-holder please
see chapter 3, figures 9, 10 and 11 of
the assembly manual. Remember that
the wire must run unhindered and
facing the direction of the extruder.
unblOcking the extruder
To avoid damage during transport, the extruder
is secured with clamps. The clamps must
be carefully cut and removed to allow the
extruder to move freely. DO NOT feed the
printer until you have done this step, otherwise
you will damage the motors and mechanics.
Remove all the packaging
inside the machine.