en
en
23
Ardo medical AG
4.3.4. Switch stimulation mode / expression mode
To change the stimulation mode display screen (orange display) to the
express mode display screen (green display), press the ‘Mode’ button just
to the right of the “ON / OFF” button.
The change can be made at any time by pressing the ‘Mode’ button.
If the Carum is in stimulation mode and the ‘Mode’ button is not pressed,
the unit will automatically change to express mode after 2 minutes. Press
the ‘Mode’ key to return to stimulation mode.
When the mode changes, the background colour of the LCD screen
changes accordingly. In addition, the symbol relevant to stimulation or
expression mode will be highlighted on the LCD display.
Background colour in stimulation mode is orange.
Background colour in expression mode is green.
In each separate mode of operation, vacuum strength and cycles level can
be individually adjusted.
When changing from stimulation mode to expression mode, the vacuum
strength will automatically be set to 30mbar, and the cycles level to 45
cycles, from the previously set values.
When changing from express mode to stimulation mode, the vacuum
strength will be set to 60mbar, and the cycles level to 90 cycles. These
values also apply when the unit is switched on.
4.3.5. Using express mode, skipping stimulation mode (“Sensitive Programme”)
If the ‘mode’ button is pressed within 2 seconds of switching on the Carum,
stimulation mode is skipped. Express mode starts with an especially mild,
gentle and low level vacuum of 30mbar and a cycles level of 30 cycles.
4.3.6. Timing / Time Button
Timing starts automatically when the Carum is switched on. To stop
timing, press the ‘time’ button. Timing will remain de-activated until
re-started by pressing the ‘time’ button again, or until the unit is turned
off. The timer will be reset to 00:00 when the ‘time’ button is pressed for a
second time.
Press the ‘time’ button again to restart the timer. The timer can be switched
on and off in either stimulation or express mode.
4.3.7. Backlight
Using the Carum in a darkened room can be made more comfortable
by dimming the intensity of the LCD. To reduce the intensity of the
backlighting, press the ‘light’ button (to the left of the LDC) once.
The dim function can be turned on and off as required.
zur Verfügung gestellt von Gebrauchs.info
Aktualisierungsstand Gebrauchs.info August 2016
