OPERATION
13
HOW TO USE THE CURB-HOPPING FEATURE
Because only the front wheel are adjustable,
the Edger can be used on the even surfaces,
such as the shown in Figure 13.
Set the wheel positions as follows.
1. Stop the engine.
2. Disconnect the spark plug wire from the
spark plug.
3. Loosen the
front wheel knob
.
4. Slide the
front wheel
to the best posi-
tion to clear the curb and balance the
unit.
5. Securely tighten the
front wheel knob
.
6. Use the
curb height adjust lever
to
lower the
front wheel
.
wheel
until the
front wheel
is level with
the rear wheels and the unit is setting
on the curb as shown in Figure 13.
7. Connect the spark plug wire to the spark
plug.
WARNING: Keep away from the
rotating blade. The blade can
cause injury.
Figure 13
Summary of Contents for 400028
Page 30: ...Ardisam...
