10
ENGLISH
Dispositivo Medico di Classe I
D. Lgs. 24/02/97 n.46 attuazione della direttiva CEE 93/42 e successive modifiche
1. CODES
CPA501
Wheelchair Tray 55x32cm
CPA502
Wheelchair Tray 55x32cm
CPA506
Shaped Wheelchair Tray 58x38cm
CPA507
Shaped Wheelchair Tray 58x38cm
CPA516
Shaped Wheelchair Tray 68x57cm
CPA517
Shaped Wheelchair Tray 68x57cm
2. INTRODUCTION
Thank you for purchasing a ARDEA ONE product by Moretti product range. Its design
and quality guarantee comfort, safety and reliability to the user. The products have been
planned in Italy from the Research and Development department of Moretti S.p.A. Italia in
order to meet your requirements. The material used, the accessories and the quality test are
continuously checked by Moretti staff. Only the production is made in PRC according to the
highest quality an safety standards in accordance with the European Directive on Medical
devices. This user’s manual provides some suggestions as how to correctly use the product
you have chosen and gives some valuable advice for your safety. Please read through the
manual carefully before using the product. Should you have any queries, please contact your
retailer for advice and assistance. In case of doubts, we recommend to contact the dealer
who can help and advice you properly.
Note:
check all parts for any shipping damage, and test before using. In case of damage, do not
use the device. Contact your dealer for further instruction.
3. INTENDED USE
This product is an accessory for medical devices (wheelchairs) for people with mobility
problems. Adaptable for wheelchairs of measures from 38 to 53cm (CPA501, CPA502 and
CPA506, CPA507) and > of 53cm (CPA516, CPA517).
WARNING!
• Do not use the product for a purpose not indicated in this manual
• Moretti S.p.A declines all responsibilities for any consequences resulting from an
incorrect use of this product and from unauthorized alteration to the frame
of the product
• The manufacturer reserves the right to change the information contained in this
document without notice
4. DECLARATION OF CONFORMITY CE
Moretti S.p.A. hereby declares, under its own exclusive responsibility, that the products
manufactured and sold by Moretti S.p.A. and belonging to the wheelchair category are
compliant with the applicable provisions outlined in the Medical Devices Directive 93/42/EEC
and further modifications. To this end Moretti S.p.A. guarantees and declares as follows, under
its own responsibility:
1. The devices in question satisfy the essential requirements of Annex I of directive
93/42/EEC as prescribed by Annex VII of the said directive
