13
ENGLISH
Turn over the armrest
1. As showed in the picture, remove the PU padding
(A)
, from the armrest frame
(E)
2. Place the PU padding on a flat surface and insert the spacers
(B)
3. Then set the tray support
(C)
, the armest frame
(E)
and insert the screws
(D)
.
4. Tighten the screws
(D)
.
8. BEFORE USE
• Always check the wear of the parts where the accessories have to be fixed to ensure
the safe use of the device for persons and things.
• Check the correct assembly of the product. Ensure that all parts are properly assembled.
• After completing the assembly, verify the correct operation of the product.
• You can use the self-propelling wheelchairs, being very careful to entrapment due to
the reduction of visibility.
• Adapt products to the user and the wheelchair in use.
9. CLEANING AND DISINFECTION
9.1 Cleaning
To clean the aid and the structure use a solution of alcohol and neutral soap (in equal parts)
mixed with water.
WARNING!
Do not use abrasive substances, acids, alkaline, alcohol, chlorine-based cleaners,
disinfectants and acetone when cleaning, because these substances cause the
abrasion of the plastic surfaces and rusting of metal surfaces
The manufacture company cannot be held responsible for the damage that is caused by using
materials that could damage the product surface or corrosive chemicals during cleaning.
9.2 Disinfection
If you need to disinfect the product use a common disinfectant cleaner.
Note:
absolutely avoid the use of acids, alkaline or solvents such as acetone or diluent.
10. GENERAL CONDITIONS OF DISPOSAL
In case of disposal don’t use the inserting container for municipal waste. We recommend to
dispose the wheelchair in the appropriate disposal areas for recycle.
