ENGLISH
22
-Use the reclining backrest
Adjust the backrest inclination by pressing the left lever on the handle bar and press the
backrest down. Release the backrest to take it back to the usual inclination
-Use the seat
Adjust the inclination of the seat by pressing the right lever on the handle bar and press the seat
down. Release the seat to take it back to the usual inclination
-Use the sliding seat
The top of the seat can be adjusted in depth to give the patient more comfort. Unscrew the
10mm nuts under the seat and adjust the position onwards or backwards.
-Use the hip stopper
Use the hip stopper to avoid the continuous contact between lower limbs. It can be adjusted
by using the knob under the seat.
- Use the rear big wheels
The rear 60cm wheels are used when self-propelled. Grasp the handrail and wheel through
the desired direction
- Use the rear small wheels
The rear 30cm casters are used when wheel by an assistant through the handles
- Use the quick release wheels
The Relief wheelchair is equipped with quick release wheels. To remove the wheel press the
button in the centre and extract the wheel outwards. Follow the procedure reversed to po-
sition the wheel.
WARNING!
1. Before removing a wheel make sure that the wheelchair does not incur accidental falls
2. Do not remove a wheel with the patient seated on the wheelchair
WARNING!
These techniques are intended to be used only by experienced users. In contrary
case it is required a technical assistance
MA CP900-xx_CP910-xx RELIEF 01 B.indd 22
02/02/18 09:27
