ENGLISH
23
-Use the shoulder stopper
The shoulder stopper can be adjusted in height, length and in orientation:
Adjust the height/width - unloose the knob on the backrest to adjust height and length
Adjust the orientation - in the back of each stopper there are spherical pins which allow to
adjust the shoulder stopper by unloosing the knob in the back.
-Use the headrest
The headrest can be adjusted in height, depth and orientation:
Adjust the height - unloose the knob in the back of the headrest
Adjust the depth - unloose the knob in the back of the headrest. The support allow the
headrest to be adjusted in depth and inclination.
Adjust the orientation - the back of the headrest is equipped with a spherical pin which allow
the headrest to be oriented
-Use the handle bar
The handle bar is intended to wheel the wheelchair or to adjust the backrest and the seat
inclination. The handle bar can be adjusted in height by unloosing the knobs on the bar, then
lift or lower it.
-Use the anti-tipper castors
Adjust the height by pulling the metallic ring, release it when the correct adjustment is found
-Use the brakes
The back wheels are provided with drum brakes. Press the correspondent lever on the handle
bar. Release to wheel the wheelchair.
NOTE
THE BRAKES CAN AUTOMATICALLY REMAIN LOCKED. TO USE THIS FEATURE
PUSH THE LOCKING ELEMENT UNDER THE BRAKE LEVER. TO UNLOCK THE BRAKE
PRESS THE LEVER UNTIL THE LOCKING ELEMTENT IS COMPLETELY OUT FROM THE
GEAR.
- Carrying
The wheelchair has been designed to be easily carried. Follow the reversed procedure descri-
bed in “Assembly” chapter. The closed wheelchair can be carry in the car boot.
MA CP900-xx_CP910-xx RELIEF 01 B.indd 23
02/02/18 09:27
