ACE-SDC-V3 Manual
page 34
rev 1.08
9.2. Error Codes
If an ASCII command cannot be processed by the ACE-SDC-V3, the controller
will reply with an error code. See below for possible error responses:
Error Code
Description
?[Command]
The ASCII command is not understood by the ACE-SDC-V3
?Moving
A move or position change command is sent while the ACE-
SDC-V3 is outputting pulses.
?SSPD not allowed
On-the-fly speed command, SSPD, is issued when the motor is
not moving.
Table 9.1
