Arctiko ULUF P390 Original Operating Instructions Download Page 3

5

4

Introduction

Abbreviations

Symbols

Please take a few minutes to read and become familiar with the advantages 

of your appliance. To meet the high quality demands required by the medical 

and pharmaceutical industry, at least 10 % of all appliances that leaves Arctiko 

are carefully checked and tested to ensure high performance and quality. If the 

operating and installation instructions describe different models, any 

differences will be pointed out at the relevant points in the text. Read these 

operating and installation instructions before switching on the appliance.

If you would like to obtain further information about this appliance, please visit 

our webside www.arctiko.com where downloads are available on the page of 

each specific product.

A    

Ampere

V    

Volt

  Watt

C    

Degree Celcius

Kg  

Kilogram

MM 

 Milimeter

Min

   Minutes

H

       Hour

N/A

   Not applicable

ULT

   Ultra-low temperature

WARNING 

Performing this action can cause personal injury.

CAUTION 

Risk of personal or material injury

Consult the instructions before attempting to use this equipment.

Prohibition  

Action is strictly prohibited.

Follow procedures  

Keep the instructions handy for convenient reference.

OFF

Disconnect power supply before operation.

Fragile

 -

 

Handle with with care

Indicates a device that can be damaged or broken if not 

handled with care.

Grounding

Be aware that the appliance is grounded.

Safety

Arctiko is obligated as a supplier to ensure the users safety when operating 

one of our appliances. To prevent personal and material injury or damage, 

please follow the instructions in this manual.

Intended use 

Ultra-low temperature appliances are designed for storage of biomedical 

products at a constant temperature in clinical, pharmaceutical, research and 

laboratory fields. The appliances are designed to operate within a 

temperature range of -40°C to -90°C at a maximum ambient temperature of 

+25°C. For safe and optimal performance of the appliance, it should only be 

placed indoors, in a well ventilated room and in elevations below 2000 m.

The appliance should only be operated by instructed personnel.

Personal safety 

When operating an ultra-low temperature freezer your body is exposed to a 

variation of possible dangerous events. 

- Read and understand this manual. If in doubt, contact your local Arctiko   

  distributor.

- Use freezer gloves at all times when loading or unloading the equipment. 

  The temperature of operation is such that direct contact with the cold 

  contents or inside the equipment can burn unprotected skin. 

- Assure good cleaning practices at all times by keeping the equipment and 

  the adjacent areas clean, dry and uncluttered.

Do not insert metal objects such as pins or a wires into any vent, 

gap or any outlet on the appliance. 

This may cause electric shock or 

injury by accidental contact with moving parts.

When removing the power plug from the outlet, pull on the plug, 

not the cord. 

Pulling the power cord may result in electric shock or 

fire by short circuit.

Summary of Contents for ULUF P390


























Reviews: