Arctiko CRYO 170, Operating Instructions Manual, Page: 32 / 40

GB
31
Maintenance
Before cleaning the appliance, you must unplug it and take out
all the stored materials. Then, open up the door to defrost the
appliance.
• Prepare lukewarm water containing a small amount of neutral detergent. Soak a cloth in
the water, wring it out, and clean the door. Remove any remaining water with a dry
cloth. Keep the door open until it is completely dry. Do not use any polisher.
• Clean the door gasket with water and dry it regularly. Do not use oil or grease, since
the gasket may be damaged or ripped.
• To clean the exterior of the freezer, use any commercially available wax cleaner.
However, make sure that the wax does not touch any plastic parts of the appliance.
The condenser and compressor are very hot. Do not touch any
part of them, or you may suffer burns.
Make sure that any electrical parts do not come into contact
with water. Failure to follow these instructions may lead to
electric leak age or breakdown.
Do not use the following substances:
Thinner, benzene, alcohol, petroleum, powder soap, polisher, alkaline-detergent
(Including mild ones), hot water, acid, scrubbing brushes, etc.
• The above mentioned substances may damage the paintwork and plastic surfaces of the
appliance. Especially, Alkalescent detergents may transform the plastic surfaces. Follow
precautions in using a chemical rag. Clean inside the compressor room (in particular,
condenser) with a vacuum cleaner at least once a year.