Arctiko CRYO 170, Operating Instructions Manual, Page: 13 / 40

12
Operation panel (Double Cooling System)
You can control the temperature by setting parameters.
1. When switching on the freezer, the initial screen will be displayed for 4 seconds.
2. The controller shows the present value (PV) and set value (SV)
Changing the set value by pressing
,
Key to set the temperature.
The range of temperature of use is -140°C ~ -150°C.
Use in a condition other than this range may cause breakdown.
Do not operate this for a purpose other than temperature control, since it
may cause a breakdown.
PV Present value, actual temperature
SV
Set point value, desired temperature in the unit
OUT 1,2 Indicator light is on when Outputs 1 or 2 are on.
AL 1,2 Indicator light is on when event outputs 1 or 2 are on.
COM
Not available
RDY Flickering when it is getting ready
DI Indicator light on when DI is on
MODE Key Used to shift screen
FUNC Key Used to run the set function
Key
Used to increase/decrease (change) the set value