c) Close supervision is necessary when any appliance is used by or near children.
d) To avoid injury, do not contact moving parts or hot parts such as heater, reflectors, lamp
bulbs, and the like.
e) Always unplug an appliance from an outlet when not in use, before putting on or taking off
parts, and before cleaning. Never yank cord to pull plug from outlet. Grasp the plug and pull to
to disconnect.
f) Do not install or store the appliance where it will be exposed to the weather or to
temperatures below freezing.
h) Make sure an appliance mounted on a tank is securely installed before operating it.
i) Read and observe all the important notices on the appliance.
j) If an extension cord is necessary, a cord with a proper rating should be used. A cord rated for
less amperes or watts than the appliance rating may overheat. Care should be taken to arrange
the cord so that it will not be tripped over or pulled.
k) This appliance has a polarized plug (one blade is wider than the other). As a safety feature,
this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord
unless plug can be fully inserted. Do not attempt to defeat this safety feature.
l) Make sure the chiller is not allowed to overheat, chiller MUST have a minimum clearance of
1 foot before the intake of condenser and 1 foot behind the exhaust to evacuate heat.
m) Chiller should NOT be placed inside a cabinet stand. This will impede air flow and may
reduce the efficiency of the chiller, and may cause permanent damage to appliance.
n) Always check water connections before operation for leaks.
CLEANING
It is important to keep this appliance clean. Always unplug the appliance before performing
maintenance or cleaning of the exterior of this chiller. Wipe exposed surfaces carefully with a
damp terry cloth to remove any dust or mineral deposits which may collect over time. Make
sure all surfaces are dry before re-plugging into an electrical outlet.
SERVICING
In order to assure proper electrical connections and polarity, replacement parts and servicing
should be performed by a qualified electrician.
OPERATION
Please carefully read the entire "Owner's Manual" for proper operation procedures before
proceeding with turning on this appliance.
SAVE THESE INSTRUCTIONS
- 2 -
