17
Onzen Technical Guide
Steps to help Set Filtration & Onzen Settings Continued
You can move backwards through the settings by pressing the Pump 3 button (Pump 4 on Epic series spas). The Pump
1 button will allow you to exit without saving any changes. When you get to the end of the options, press the filter key
one last time to save changes and begin a filter cycle immediately. If you do not press the filter key again your changes
will be saved and the filter cycle will begin when you have programmed it to do so.
* Press your Filter/Pump 5 button again to start the next cycles immediately (Pumps will purge for 20
seconds).
To EXIT without saving changes press Pump 1.
To SAVE & EXIT but not start the cycle simply let the display time out.
5
