Arctic Cat XC 450 2016, Service Manual

Page: 20 / 120

19
KC184A
4. Place the handlebar and caps in place on the steering
post and with the handlebar correctly positioned,
tighten the cap screws to 20 ft-lb.
KC0058
5. Install the steering post cover; then install the front
body panel/fender.
Speedometer/LCD Gauge
REPLACING
1. Remove two machine screws securing the gauge pod
to the handlebar; then lift the gauge pod up and dis-
connect the harness plug from the gauge.
KC391B
2. Loosen the gauge mounting nuts and remove the
gauge from the pod.
3. Install the new gauge and secure with the mounting
nuts; then plug the harness into the gauge and secure
the gauge pod with the machine screws. Tighten
securely.
Handlebar Grip
REMOVING
1. Loosen but do not remove the cap screw in the end of
the handlebar; then tap lightly on the head to dis-
lodge the handlebar plug.
KC310
KC309A
2. Grasp the end and remove the cap screw, plug, and
end cap.
KC308
3. Using a sharp utility knife, split the handlebar grip
from end to end and peel off the rubber.
4. Using an adhesive solvent, clean all glue residue
from the handlebar.
INSTALLING
1. Apply a liberal amount of Handlebar Grip Adhesive
to the inside of the new grip.