74
2. Loosen the drain screw and allow
the gasoline and condensation to
flow out.
AF925
3. Tighten the drain screw securely
and remove the hose.
OIL LEVEL
INSPECTION WINDOW
(Manual Transmission
Models)
The oil level inspection window is
located on the lower-right side of the
transmission. With the ATV on a level
surface, the oil level should be visible
at any point between the level marks.
ATV-0074
OIL LEVEL STICK
(Automatic
Transmission Models)
There is an oil level stick for checking
the engine oil level. To check the oil
level, use the following procedure.
ATV-0100
KX019A
NOTE: The ATV should be on
level ground when checking the
engine oil level.
1. Unscrew the oil level stick and
wipe it with a clean cloth.
2. Install the oil level stick.
NOTE: On the 400/500/650, the
oil level stick should not be
threaded in for checking purposes.
NOTE: On the 650 V-Twin, the oil
level stick should be threaded in
for checking purposes.
3. Remove the oil level stick; the
engine oil level should be above
the “L” mark but not higher than
the “F” mark.
! WARNING
Do not drain float bowl contents
directly onto the engine. Gasoline is
highly flammable and could ignite.
Use a hose.
! WARNING
It is very important that the drain
screw be tightened securely. If it is
not tightened securely, gasoline
could drip onto the engine.
400/500/650
650 V-Twin
Summary of Contents for ATV 2005
Page 106: ...104 NOTES...
Page 114: ...112 MAINTENANCE RECORD DATE MILEAGE SERVICE PERFORMED NOTES...
