100
ATV-0070
7. Adjust each headlight until correct
aim is obtained.
NOTE: On the 250/300/400 FIS/
ACT models, it will be necessary to
remove the two machine screws
securing the front grille and
removing the grille for steps A and
B.
NOTE: Steps A and B are for the
250/300/400 FIS/ACT models; step
C is for the 400 TBX/500/650/650 V-
Twin models.
AF926A
A. Horizontal — Loosen nut A
and adjust for proper aiming.
Tighten the nut securely.
B. Vertical — Loosen nut B and
adjust for proper aiming.
Tighten the nut securely.
C. Turn the nut clockwise to raise
the beam and counterclockwise
to lower the beam.
AL670A
FUSES
The fuses are located in a fuse block
under the center cover in the front
fender assembly (on the 250/300 mod-
els), under the seat (on the 400 ACT
model), and in a power distribution
module under the seat (on the 400 FIS/
500/TBX/650/650 V-Twin models). If
there is any type of electrical system
failure, always check the fuses first.
250/300
10 A IGN
15 A LIGHTS
10 A ACC
10 A SPARE
400/500 FIS Auto/650
650 V-Twin
Summary of Contents for ATV 2005
Page 106: ...104 NOTES...
Page 114: ...112 MAINTENANCE RECORD DATE MILEAGE SERVICE PERFORMED NOTES...
