background image

43

Warranty Procedure/Owner Responsibility

At the time of sale, an Owner Registration form is to be completed by the selling dealer

and consumer. The receipt of the registration form by Arctic Cat is a condition prece-

dent to warranty coverage. It is the selling dealer’s responsibility to retain and/or submit

the appropriate copies of the form to the appropriate place(s) to initiate warranty cover-

age.
The dealer will furnish to the consumer a signed copy of the form which must be pre-

sented to the dealer when requesting warranty service. The registration form is the con-

sumer’s proof of ownership and warranty eligibility. The form is used by the dealer to

validate the warranty claim. Retain your copy of the form and keep it in a safe place.
When warranty repair is suspected, the snowmobile should be taken to the selling

dealer, who has the primary responsibility to perform warranty repairs. Subject to the

limitations set forth in the Limited Warranty, in the event the selling dealer has ceased

to do business, you have moved, or you are in a location away from your selling dealer,

warranty may be performed by any authorized Arctic Cat Snowmobile dealer.
The authorized Arctic Cat Snowmobile dealer will examine the snowmobile or part to

determine if, in his opinion, a warrantable condition exists. If a warrantable condition

appears to exist, the dealer will repair or replace, at Arctic Cat’s option, free of charge,

including any related labor costs, all parts that are found to be warrantable and any

other parts which the warrantable part caused to be damaged. You, the consumer, will

then be asked to sign a warranty form to ensure Arctic Cat that the warranty work was

actually performed.
It is the consumer’s responsibility to maintain and service the snowmobile in accor-

dance with Arctic Cat’s recommendations in the Operator’s Manual. To protect yourself

and your snowmobile, follow all safety and service tips. Arctic Cat will NOT warrant

repairs required as a result of not performing standard operator maintenance, storage

procedures, and service as outlined in the Operator’s Manual.
Should you have any questions concerning the warranty, contact an authorized Arctic

Cat Snowmobile dealer.
 
Arctic Cat Inc., P.O. Box 810, Thief River Falls, MN 56701  218-681-9851

Summary of Contents for 2262-967



















































Reviews:

Related manuals for 2262-967