Arctic Cat 2015 WILDCAT SPORT Operator'S Manual Download | Manualshive

Page: 17 / 68

background image

! WARNING

Indicates a hazardous situation which, if not
avoided, could result in death or serious injury.

15

Warnings

! WARNING

POTENTIAL HAZARD

Operating this vehicle through deep or fast flowing water.

WHAT CAN HAPPEN

Tires may float, causing loss of traction and loss of control, which could lead to an
accident.

HOW TO AVOID THE HAZARD

Never operate this vehicle in fast flowing water or in water deeper than the floorboard.
Remember that wet brakes may have reduced stopping capability.
Test the brakes after leaving water. If necessary, apply them several times to dry
out the pads.

! WARNING

POTENTIAL HAZARD

Operating the vehicle with improper tires or with improper or uneven tire pressure.

WHAT CAN HAPPEN

Use of improper tires on the vehicle, or operating the vehicle with improper or
uneven tire pressure, could cause loss of control increasing your risk of accident.

HOW TO AVOID THE HAZARD

Always use the size and type tires specified in this Operator’s Manual for this vehicle.
Always maintain proper tire pressure as described in this Operator’s Manual.

! WARNING

POTENTIAL HAZARD

Operating this vehicle with improper modifications.

WHAT CAN HAPPEN

Improper installation of accessories or modification of the vehicle may cause
changes in handling which, in some situations, could lead to an accident.

HOW TO AVOID THE HAZARD

Never modify this vehicle through improper installation or improper use of accessories.
All parts and accessories added to this vehicle should be genuine Arctic Cat compo-
nents designed for use on this vehicle and should be installed and used according to
instructions. If you have questions, consult an authorized Arctic Cat dealer.

! WARNING

POTENTIAL HAZARD

Operating the vehicle with differential lock engaged.

WHAT CAN HAPPEN

The increased steering effort and reduced maneuverability caused by the locked
differential could result in loss of control and an accident.

HOW TO AVOID THE HAZARD

Never exceed 10 MPH (16 KPH) with the differential lock engaged. Always disen-
gage the differential lock as soon as not needed for additional traction.

«
...
15
16
17
18
19
...
»

Summary of Contents for 2015 WILDCAT SPORT





































































Reviews:

No comments

Related manuals for 2015 WILDCAT SPORT

1993 TRX300 TOURTRAX 300

Brand: Honda Pages: 158

Brand: Chongqing Astronautic Bashan Motorcycle Manufacturing Pages: 16

Brand: CadKat Pages: 11

MAVERICK Trail 2021 Series

Brand: Can-Am Pages: 195

Brand: Suzuki Pages: 33

ATV ELECTRIC POWERED

Brand: MINIMOTO Pages: 31

OUTLANDER 6x6 2021 Series

Brand: Can-Am Pages: 204

amphibious, off-road utility vehicle

Brand: Centaur Pages: 56

Brand: Can-Am Pages: 144

Brand: DAELIM Pages: 1

Brand: Apogee Pages: 24

Brand: Erde Pages: 4

Brand: gio Pages: 78

Brand: Arctic Cat Pages: 84

Brand: Tomberlin Pages: 32

Honey Joy TY324116

Brand: Costway Pages: 7

Brand: Baja motorsports Pages: 8

Brand: Landa Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands