background image

Warranty Procedure/Owner Responsibility

At the time of sale, an Owner Registration form is to be completed by the selling

dealer and consumer. The receipt of the registration form by Arctic Cat is a condi-

tion precedent to warranty coverage. It is the selling dealer’s responsibility to retain

and/or submit the appropriate copies of the form to the appropriate place(s) to initi-

ate warranty coverage.
The dealer will furnish to the consumer a signed copy of the form which must be

presented to the dealer when requesting warranty service. 

The registration form is

the consumer’s proof of ownership and warranty eligibility. The form is used

by the dealer to validate the warranty claim.

 Retain your copy of the form and

keep it in a safe place.
When warranty repair is suspected, the snowmobile should be taken to the selling

dealer, who has the primary responsibility to perform warranty repairs. Subject to

the limitations set forth in the Limited Warranty, in the event the selling dealer has

ceased to do business, you have moved, or you are in a location away from your

selling dealer, warranty may be performed by any authorized Arctic Cat Snowmo-

bile dealer.
The authorized Arctic Cat Snowmobile dealer will examine the snowmobile or part

to determine if, in his opinion, a warrantable condition exists. If a warrantable con-

dition appears to exist, the dealer will repair or replace, at Arctic Cat’s option, free

of charge, including any related labor costs, all parts that are found to be warrant-

able and any other parts which the warrantable part caused to be damaged. You, the

consumer, will then be asked to sign a warranty form to ensure Arctic Cat that the

warranty work was actually performed.
It is the consumer’s responsibility to maintain and service the snowmobile in accor-

dance with Arctic Cat’s recommendations in the Operator’s Manual. To protect

yourself and your snowmobile, follow all safety and service tips. 

Arctic Cat will

NOT warrant repairs required as a result of not performing standard operator

maintenance, storage procedures, and service as outlined in the Operator’s

Manual.

Should you have any questions concerning the warranty, contact an authorized Arc-

tic Cat Snowmobile dealer.
 
Arctic Cat Inc., P.O. Box 810, Thief River Falls, MN 56701 (218) 681-8558

Summary of Contents for 2011 Crossfire 600

























































Reviews:

Related manuals for 2011 Crossfire 600