background image

Reference Information

Write the appropriate information for your Arctic Cat Snowmobile in the spaces

below. 
Always use these numbers when referring to your snowmobile.

Model: _________________________________________________
Date of Purchase:  ________________________________________
Vehicle Identification Number:  _______________________________
Engine Serial Number: _____________________________________

Your Arctic Cat Dealer: 

___________________________________

Address:

 _______________________________________________

Phone:

 _________________________________________________

! WARNING

A snowmobile is a very high performance vehicle. Because it does acceler-
ate rapidly and is capable of very high speeds, it should not be operated by a
novice or an inexperienced operator. Never accelerate rapidly or drive at
high speed beyond the limits of visibility or without being totally familiar
with the terrain and what lies in front of you. Obey speed limits and never
operate at speeds that do not allow adequate maneuvering and stopping dis-
tances. Read and study the entire Operator’s Manual and Safety Handbook.
Failure to follow this warning could result in personal injury to yourself or
others.

Personal Injury

• To avoid injury to yourself and others, NEVER operate the snowmobile without

first reading and understanding this manual and the Snowmobile Safety Hand-
book; then follow the instructions and heed the warnings given.

• USE COMMON SENSE.
• DON’T DRINK and DRIVE.
• STAY IN CONTROL at ALL TIMES.
• TELL YOUR FRIENDS. If you see a friend operating a snowmobile recklessly, at

excessive speeds, while intoxicated, or in other unsafe ways, don’t wait until it is
too late to warn of the consequences of snowmobile misuse. Such conduct
endangers everyone. TAKE AN ACTIVE ROLE IN THE SAFETY OF YOUR-
SELF AND OTHERS.

Parts and Accessories

When in need of replacement parts, oil, or accessories for your Arctic Cat Snowmo-

bile, be sure to only use GENUINE ARCTIC CAT PARTS, OIL, AND ACCESSO-

RIES. Only genuine Arctic Cat parts, oil, and accessories are engineered to meet the

standards and requirements of your Arctic Cat Snowmobile. For a complete list of

accessories, refer to the current Arctic Cat Accessory Catalog. To aid in service and

maintenance procedures on these snowmobiles, an Illustrated Parts Manual and a

Service Manual are available through your local Arctic Cat Snowmobile dealer.

Summary of Contents for 2011 Crossfire 600

























































Reviews:

Related manuals for 2011 Crossfire 600