Arctic Cat 2011 550 EFT Operator'S Manual Download | Manualshive

Page: 38 / 64

background image

36

The main brake should be applied when-
ever a braking situation is needed.

Hand Brake Lever/Brake

Lever Lock

738-420B

Apply the brake by compressing the
brake lever toward the handlebar.

To engage and release the brake lever
lock, use the following procedure.

1. Squeeze the left-side hand brake lever

two or three times and release it.

2. Depress and hold the brake lever

lock.

3. While holding in on the brake lever

lock, squeeze the brake lever.



NOTE: It will click as it engages

and the brake lever will not return to
its released position.

4. Release the brake lever lock by

squeezing the brake lever. It will
return to its released position.

Check to make sure the brake lever lock
engages properly and that the brake
(when engaged) locks the wheels.

1. Pump the brake lever 2 or 3 times.

2. Engage the brake lever lock.

3. Attempt to push the ATV.



NOTE: The brake lever lock must

lock the wheels. If it doesn’t, take
the ATV to an authorized Arctic Cat
ATV dealer for service.

Emergency/Parking Brake

ACE-003

To engage and release the emergency/
parking brake, use the following proce-
dure.

1. While squeezing the right-side brake

lever, squeeze the emergency/park-
ing brake aligning the pin on the
brake assembly with the groove in
the emergency/parking brake.



NOTE: It will click as it engages

and the brake lever will not return to
its released position.

2. Release the emergency/parking

brake by squeezing the brake lever.
It will return to its released position.

Check to make sure the emergency/park-
ing brake engages properly and that the
brake (when engaged) locks the wheels.

1. Engage the emergency/parking brake.

2. Attempt to push the ATV.



NOTE: The emergency/parking

brake must lock the wheels. If it
doesn’t, take the ATV to an authorized
Arctic Cat ATV dealer for service.

! WARNING

Always check to be sure that the
brake lever lock has been disen-
gaged before operating the ATV. An
accident could result if the brake
lever lock is left engaged while the
ATV is operated. The brake may
relax if left engaged for a long period
of time. This could cause an acci-
dent; therefore, do not leave the ATV
on a hill depending on the brake
lever lock. Always engage emer-
gency/parking brake (right side).

«
...
36
37
38
39
40
...
»

Summary of Contents for 2011 550 EFT

































































Reviews:

No comments

Related manuals for 2011 550 EFT

WorkHorse ST 480

Brand: Ezgo Pages: 164

LYNX RADIEN UTILITY ACE 2022 Series

Brand: BRP Pages: 252

Brand: WABASH COMMUNICATIONS Pages: 47

TRX90 Sportrax 90

Brand: Honda Pages: 208

65 TREE Transplanter

Brand: Dakota Pages: 16

OUTLANDER 6x6 2021 Series

Brand: Can-Am Pages: 204

Brand: LJ'S TOPS & BOTTOMS Pages: 14

Brand: Labrie Pages: 62

Brand: Landoll Pages: 68

Renegade 570 2016

Brand: Can-Am Pages: 534

Brand: BERG Pages: 12

Brand: American Sportworks Pages: 13

2009 LT-A750XK9

Brand: Suzuki Pages: 711

Brand: Ultraflex Pages: 22

Club Car CARRYALL 710 LSV ELECTRIC

Brand: Ingersoll-Rand Pages: 108

Brand: Polaris Pages: 88

Brand: Polaris Pages: 114

Brand: Polaris Pages: 107

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands