background image

1

Introduction

Thank you for purchasing a high quality
All-Terrain Vehicle (ATV) by ARCTIC
CAT

®

. Be sure as the owner/operator of

the ATV to become thoroughly familiar
with its basic operation, maintenance,
and storage procedures. Carefully read
this Operator’s Manual before starting
your ATV.

Particularly important information is dis-
tinguished in this manual by the words
Warning, Caution, and Note to empha-
size important information. The symbol

! WARNING

 identifies personal

safety-related information. Be sure to fol-
low the directive because it deals with the
possibility of severe injury or death. A

CAUTION

 identifies unsafe prac-

tices which may result in ATV-related
damage. Follow the directive because it
deals with the possibility of damaging
part or parts of the ATV. A 

NOTE:

identifies supplementary information
worthy of particular attention. 

This manual contains instructions on how
to start and operate the ATV as well as
important information on how to store it
in the season break. For major repairs or
service, please contact an authorized Arc-
tic Cat ATV dealer. 

At the time of publication, all informa-
tion and illustrations were technically
correct. Some illustrations are used for
clarity purposes only and are not
designed to depict actual conditions.
Because Arctic Cat constantly refines
and improves its products, no retroactive
obligation is incurred.

This Arctic Cat ATV Operator’s Manual
should be considered a permanent part of
the ATV and must remain with the ATV
at the time of resale. If the ATV changes
ownership, please contact the warranty
service department of the Company
ARCTIC CAT GmbH, Industriestrasse
43, 5600 St. Johann/Pg., Austria to
ensure proper registration. This manual
was prepared by the service department
of Arctic Cat.

Parts and Accessories

When in need of replacement parts, oil, or accessories for your Arctic Cat ATV, be
sure to use only GENUINE ARCTIC CAT PARTS, OIL, AND ACCESSORIES.

Only genuine Arctic Cat parts, oil, and accessories are engineered to meet the
standards and requirements of your Arctic Cat ATV. For a complete list of
accessories, refer to the current Arctic Cat ATV Accessory Catalog.

To aid in service and maintenance procedures on this ATV, a Service Manual and
an Illustrated Parts Manual are available through your local Arctic Cat ATV
dealer.

TREAD LIGHTLY!

ON PUBLIC AND PRIVATE LAND

OFFICIAL

SPONSOR

®

Summary of Contents for 2011 550 EFT

































































Reviews: