Arctic Cat 2008 400 4x4, Operator'S Manual

Page: 27 / 82

Page 25
4. High Beam Indicator: A blue
light will illuminate when the lights
are on high beam. The light will not
be illuminated when the lights are
switched to low beam.
5. Temperature Indicator: A red
light will illuminate if the engine
overheats (400/500/650 H1).
700 Diesel: The complete display
extinguishes and only the „F“- lamp
will fl ash.
q
NOTE
High engine RPM, low vehicle
speed or heavy load can raise engi-
ne temperature. Decreasing engine
RPM, reducing load and selecting
an appropriate transmission gear
can lower the temperature.
q NOTE
Debris in front of the engine or pa-
cked between the oil cooler/radiator
cooling fi
ns can reduce cooling
capability. Clean the engine and
oil cooler/radiator to remove any
debris preventing air fl ow.
6. Neutral Indicator: The „N“ indi-
cator light will illuminate when the
transmission is in neutral and the
ignition switch is on. The light will
go out when shifted into any gear
other than neutral.
7. Reverse Indicator: An orange
light will illuminate when the re-
verse gear is engaged. (500/650)
!! CAUTION !!
A continuous use of the ATV with
low oil pressure can cause engine
damage or a premature wear of the
engine.
!! WARNING !!
A continuous use of the ATV with
high oil temperature can cause en-
gine damage or a premature wear
of the engine.